Administration Settings

The settings listed here are used to manage your installation of this software.

Settings

• Reset Settings to Defaults : Reset your settings to system defaults.

  If you have an Enterprise Subscription and a template has been created, those settings are used.

• Check for Software Update : Check if an update is available.
• Disable Automatic Check for Software Updates : When enabled, automatic checking for software updates is disabled. You can still manually check for and install updates.

Customization

• Edit Quick Settings (Only SEAiq Pilot) : This is turned on to control which settings are in quick list. It allows you to make certain features you use often easily available. The method of use is to turn this on, then review all the settings, marking them as being locked or not. When done, this is turned off.

  Each setting can be individually edited, including sub-menus.

  When this is turned on, you are able to edit which settings should be in the quick list.

  When this is turned off (the normal mode), those settings you have added are in the Quick menu.

  This automatically disables itself whenever SEAiq restarts.

  This cannot be turned on when Settings / Enterprise Subscription / Use Quick Tab from Server.

• Edit Visible Settings (Only SEAiq Pilot) : This is turned on to control which settings are visible. It allows you to hide features you do not use or need to adjust on a normal basis. The method of use is to turn this on, then review all the settings, marking them as being shown or hidden. When done, this is turned off and the hidden settings disappear.

  Each setting, including sub-menus, can be individually shown/hidden. Whether a setting is shown or hidden has no effect on its value.

  When this is turned on, you are able to edit which settings should be shown or hidden. While editing, all settings are shown along with a selector. The selector has two choices, S and H, for show and hide. You can adjust these values as you like.

  When this is turned off (the normal mode), all settings marked as hidden are no longer shown. To view or access those settings, you need to turn this switch back on.

  This automatically disables itself whenever SEAiq restarts.

• Show All Settings (Only SEAiq Pilot) : Enable this to temporarily make all settings visible. This does not affect your selection of which should be hidden. Disable this again to hide settings.
• Reset Hidden Settings (Only SEAiq Pilot) : Press Reset to clear all your hidden settings. All settings are marked as visible. This cannot be undone.
• Manage Hidden Settings (Only SEAiq Pilot) : List all hidden settings.

Backup & Restore

• Backup Settings : Use this to save your settings, which you can load on another device or restore from later.

  This saves almost all your settings. Saved items do not include routes, waypoints, tools, or database of vessel information. Each of these has other mechanisms for restoring.

• Restore Settings : Restore settings you had previously saved. We recommend restarting this app after restoring your settings.

Locking

• Lock Settings (Only SEAiq Pilot) : When turned on, any settings you have locked can no longer be modified.
• Password (Only SEAiq Pilot) : When a password is set and the lock is enabled, the password must be re-entered to unlock the settings.

• Edit Locked Settings (Only SEAiq Pilot) : This is turned on to control which settings are locked. It allows you to lock features you do not use or need to adjust on a normal basis. The method of use is to turn this on, then review all the settings, marking them as being locked or not. When done, this is turned off.

  Each setting can be individually locked.

  When this is turned on, you are able to edit which settings should be locked.

  When this is turned off (the normal mode), all settings marked as locked cannot be changed. To modify those settings, you need to turn this switch back on.

  This automatically disables itself whenever SEAiq restarts.

• Reset Locked Settings (Only SEAiq Pilot) : Press Reset to reset locks on all settings. All settings are marked as unlocked. This cannot be undone.
• Manage Locked Settings (Only SEAiq Pilot) : List all locked settings.