Settings / TRENZ PPUs (Only SEAiq Pilot)
TRENZ PPU Settings
These settings configure SEAiq Pilot for use
with TRENZ
Portable Piloting Units. See below for more information on using
SEAiq with TRENZ products.
Settings
Devices
-
TRENZ PPU
(Only SEAiq Pilot) : Configure for use with TRENZ PPU via WiFi. This device uses host 10.10.10.100 and port 8919. For Bluetooth operation, you can configure manually.
Sirius Configuration
-
Internal ROT
(Only SEAiq Pilot) : Enable this to configure internal ROT on TRENZ PPU's. This feature needs to be enabled via TRENZ PPU Manager.
-
Smoothed ROT
(Only SEAiq Pilot) : Enable this to configure smoothed ROT on a TRENZ PPU. This feature needs to be enabled via TRENZ PPU Manager.
-
Internal GNSS
(Only SEAiq Pilot) : Enable this to configure internal ROT on a TRENZ PPU. This feature needs to be enabled via TRENZ PPU Manager.
-
Jamming Alert
(Only SEAiq Pilot) : Enable this to configure jamming alerts on a TRENZ PPU. This feature needs to be enabled via TRENZ PPU Manager.
-
Spoofing Alert
(Only SEAiq Pilot) : Enable this to configure spoofing alerts on a TRENZ PPU. This feature needs to be enabled via TRENZ PPU Manager.
-
Configuration Diagnostics
(Only SEAiq Pilot) : Provides information about the most recent attempt to configure a TRENZ PPU.